Go to MOUNTZ home page Go to Mountz Home page
Enfasco carries the full line of MOUNTZ products.
These are just a few of our more popular Items.
Ordering is simple Just call toll Free 866-ENFASCO that is: (866) 363-2726
Talk to one of our knowledgeable Customer Service Representatives Now!

Torque Active AM Signal Wrench
The TAAMs is comprised of two parts: a miniature Transmitter module, which screws into the handle end of appropriate MTBN and TSN wrenches, and a remote Receiver unit.
These innovative tools allow an operator the freedom to work without the hassle of cables and deliver accurate torque. The TAAMS unit contains two parts: a Transmitter module (attached at the end of the wrench) and a Receiver unit. The Transmitter sends a radio signal to the Receiver whenever preset torque is reached. The receiver recordsall counts, avoiding multiple or missed signals. Each transmitter has a unique "code number" to avoid confusion of signals and the Receiver can monitor signals from four tools simultaneously with variable relay timing (.25 to 2.0 seconds) for each channel. If for any reason the radio signal is not received because something blocked it, the Transmitter retains the count in its memory and will update the Receiver either when the next wrench is used or by manually pressing a button on the end of the Transmitter. The TAAMS wrenches enhance product quality by confirming the application of the applied torque.

TAAMS Receiver
The Receiver is designed to capture radio signals sent from the Transmitter on the TAAMS wrenches. It can monitor up to 4 wrenches simultaneously as well as be programmed to "Learn" a new wrench or "Remove" a wrench.

Displayed information from the Receiver includes:

Model

Item #

Receiver

020615

Power Supply

020616
  • Channel Number 1 to 4
  • Transmitter serial number - to identify wrenches in use
  • Transmitter battery condition - to plan for replacement
  • Total count
  • Shift count - can be zeroed as required
  • Relay delay time - 0.25 to 2 seconds - or disabled
  Torque Ranges Handle Length

Model

Item #

Amer. (lbf.ft)

S.I. (N.m)

Metric (kgf.cm)

Sq. Drive

in.

mm

Wt. (oz.)

Wt. (kg)

TSN25DAM

020601

2-18

3-25

.3-2.5

1/4"

11.5

291

17

.49

TSN25AAM

020602

2-18

3-25

.3-2.5

3/8"

11.5

291

17

.49

TSN55AM

020603

10-40

15-55

1.5-5.6

3/8"

15.7

399

32

.91

TSN125AM

020604

30-90

40-125

4-12.7

1/2"

21.1

535

51

1.47
*MTBN2AM & MTBN10AM are supplied with a removable collar, which restricts the `break' angle to 20°. If the collar is removed, the `break' angle increases to 90°.
w Models operate in single direction (clockwise).

MTZ - Production Wrenches
MTBN - Interchangeable HeadWrench MTBNTAAMS
 
   Torque Ranges   
Handle Length

Model

Item #

Amer. (lbf.in)

S.I. (N.m)

Metric (kgf.cm)

in.

mm

Wt. (oz.)

Wt. (kg)

Break

MTBN2AM

020605

1.8-18

0.2-2

2-20

7.1

180

7.6

.22

20° or 90°*

MTBN10AM

020606

9-89

1-10

10-102

7.1

180

8.4

.24

20° or 90°*

MTBN20AM

020607

36-177

4-20

40-203

9.8

248

11

.33

20°

MTBN55AM

020608

89-487

10-55

102-560

14.8

377

28

.80

 20°

MTBN65AMw

020635

89-575

10-65

102-662

14.8

377

28

.80

20°

MTBN110AM

020609

177-974

20-110

203-1121

19.0

483

33

.94

20°

MTBN135AMw

020636

177-1194

20-135

203-1376

19.0

483

33

.94

20°
 

Model (for wrench

Item #

TSN25DAM or TSN25DSO

 020621

TSN25AAM or TSN25ASO 

020621

TSN55AM or TSN55SO

020623

TSN125AM or TSN125SO

020624

MTBN2AM or MTBN2SW 

020621

MTBN10AM or MTBN10SW  

 020621

MTBN20AM or MTBN20SW

020621

MTBN55AM or MTBN55SW 

020624

MTBN110AM or MTBN110SW

020624
Transmitter
  Transmitter
The Transmitter modules can be retro-fitted to existing TSN SO or MTBN SW wrenches fitted with rotary switches. Listed below are the Transmitter models for retro-fitting or for replacements.
Transmitter Battery Pack (5 Batteries)            020617
  • Designed and manufactured to meet or exceed the accuracy and repeatability requirements of ISO 6789:1992
  • Perfect for remote switching, counting, batching, production line control, auditing and monitoring.
  • Sends radio signal each time torque is achieved and the Receiver records all counts.
  • Continuous counting operations - resettable for each shift.
  • Transmitter modules can be retro-fitted to existing Signal Output Wrenches (TSN SO & MTBN SW) fitted with rotary switches.
Ordering is simple Just call toll Free 866-ENFASCO that is: (866) 363-2726
Talk to one of our knowledgeable Customer Service Representatives Now!